|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes:
1. When ordering, please specify the length of the DIP cable. This is the cable that interconnects the "main" PCB to the "switch" PCB. Any length up to 12 inches should be no problem. It's best to keep it short, though, if only for the sake of neatness.
2. The units are available with your choice of mini 1/4" switches soldered directly to the PCB or more standard sized 7/16" switches connected via a 5" length of (color-coordinated) wire. If your machine is entirely CNC controlled (no handwheels), the switches are only used in the event of a fault, and so the 1/4" switches may be an option, as they take up only a small amount of room on the front panel. If your machine does have handwheels and you do use them from time to time, the larger switches might be the choice, as their physical size makes them easier to operate.
3. All prices in US Dollars, and will be shipped from Canada.
